Many smaller installations require an easy-to-use mixer with very specific features and capabilities. You need to integrate your microphones and stereo equipment without paying for features you'll never use. And of course, you'll need dependability. The SCM262 provides features tailor-made for your smaller application -- such as defeatable "ducking," "jukebox mute," and "12V Phantom."
Simplicity
The SCM262 has been designed with simplicity in mind, allowing you to focus on your job, not your audio system. Providing the right combination of features, benefits and ease-of-use, the SCM262 is perfect for the following applications:
Restaurants
Aerobics/Health Clubs
Corporate Training
Classrooms
Precision Capabilities
The SCM262 is the latest addition to our growing Installed Sound category and provides all the performance, durability, and value synonymous with the Shure name.
DFR Automatic Feedback Reduction
Parametric and Graphic Equalizers
Cut/Shelf Equalizer
Compressors/Limiters
Automatic Gain Control
Gate/Downward Expander
Ducker
2-Way Crossover
Subwoofer Processor
Splitter
Delay Processors
2x2 Matrix Mixer
SPEC:
Frequency Response(Ref 1 kHz, channel and master controls centered)
MIC/LINE Inputs: 150 Hz to 20 kHz +/- 2 dB
AUX Inputs: 20 Hz to 20 kHz +/- 2 dB
Low-Cut Filter (Microphone inputs only)
3dB down at 80 Hz, 6 dB/octave
Total Harmonic Distortion
<0.25% at +4 dBu output level, (through 22 Hz -- 22 kHz filter; MIC Input 1 and Master at center, all other controls full counterclockwise)
Equivalent Input Hum and Noise(150 W source; 22 Hz -- 22 kHz)
?125 dBV
Output Hum and Noise (22 Hz -- 22 kHz; channel controls full counterclockwise)
Master full counterclockwise: -85 dBV
Master full clockwise: -60 dBV
Common Mode Rejection
>70 dB at 1 kHz
Polarity
All inputs to all outputs are non-inverting.
Overload and Shorting Protection
Shorting outputs, even for prolonged periods, causes no damage. Microphone inputs are not damaged by signals up to +10 dBV; Line and Aux inputs by signals up to +28 dBV